Automatic labeling machines provide great convenience to users in daily production. It is important to pay attention to daily maintenance and inspection during use in order to extend the service life of the labeling machine. So, how to do a good job in the daily maintenance and inspection of equipment such as round bottle labeling machines?

Labeling machine manufacturer Longhai Huanyu suggests paying attention to the machine aspect when using the labeling machine:

1. Pre startup inspection:

Check if the power supply is securely connected and if the pressure gauge air source is sufficient and safe;

Check whether there are ropes, hair, broken cloth, tools and other foreign objects on the machine, and remove them in a timely manner;

Is there any obstruction in the surrounding space, and are the products being prepared neatly stacked.

2. Power on and start the trial operation, check:

Check if the machine starts and runs normally;

Listen for any abnormal noises from the motor, gearbox, and conveyor belt;

Check if there is any abnormal vibration on the machine;

Press the emergency switch and check if it is functioning properly;

Check if the labels are installed correctly, etc.

3. Start using:

Pay attention to observing whether the products posted are flat and smooth;

Whether the conveying operation is stable;

If it can operate normally, the speed should not be too fast.

4. At the end of use

To shut down, tidy up and wipe, turn off the power, and cut off the gas source;

The corresponding transmission gears or chains should be regularly lubricated and maintained with butter;

Check if the brake spring is damaged or broken, and replace it if it is;

Loose screws need to be tightened;

In daily use, it is necessary to strengthen maintenance and inspection of the labeling machine, which can prevent most faults in a predictable manner and maximize the service life of the machine.